Flygt Pumps Sydney

Yes. We service Flygt pumps across commercial, industrial and strata facilities.

We can attend site to diagnose blockages, flow issues, electrical faults or irregular behaviour.

We supply Flygt pumps suited to wastewater, stormwater, slurry and general water movement in commercial and industrial systems.

Flygt was founded in Sweden in 1901 and is recognised as the pioneer of electrical submersible pumps, with a legacy spanning over 120 years as a key brand within Xylem, a leading global water technology company. Their range covers submersible pumps for wastewater, stormwater, desalination and sewage treatment, with core applications spanning municipal and industrial sewage handling, dewatering, slurry transfer and abrasive or corrosive liquid movement.

We can advise on suitable options once we understand your site needs.

Many Flygt pump designs handle solids-rich or abrasive environments. Flygt's N-technology pumps are purpose-built for tough wastewater applications, capable of handling unscreened sewage, wastewater and sludge with solids concentrations of up to 8 percent. These pumps feature a self-cleaning non-clog design and can achieve flow capacities of up to 1,000 l/s and pumping heads of up to 100 m, making them well suited to large-scale wastewater and stormwater systems.

Anti-clogging impellers are available for environments where non-dispersible wipes, rags and similar materials are prevalent in the wastewater stream. For coastal or sandy basins, Hard-Iron™ impellers are recommended to counteract rapid abrasive wear. Corrosion protection options include hard-iron hydraulic components and special epoxy coatings suited to sewage conditions. We assess suitability based on the application.

Service needs vary by site conditions and pump duty. Most high-demand systems benefit from routine scheduled servicing. In harsh or continuously wet environments, inspections should specifically include checking cable entries and connections to confirm they remain secure and protected against water ingress.

Yes. We supply replacement Flygt pumps and manage installation and commissioning.

Yes. Flygt pumps are commonly installed in pits, basements and large drainage points for stormwater control.

Yes. All servicing includes a detailed report for building records and compliance.

Yes. There are several compliance and specification requirements to be aware of when installing Flygt pumps in Australian sewage pumping and drainage applications. All equipment must bear the Australian Regulatory Compliance Mark (RCM) and be compatible with 415V three-phase or 240V single-phase 50Hz electrical networks.

Installations within sewage pumping stations are required to comply with the Sydney Water Edition of WSA-04, the Sewage Pumping Station Code of Australia. Best practice also calls for adherence to local regulatory frameworks around wastewater management and clogging prevention, particularly for systems handling high-fat or high-grit wastewater. Integrated protection relays may be required under local asset management policies.

Where pump station infrastructure is involved, materials such as sulphate-resistant concrete or fibre-reinforced plastic (FRP) are recommended to resist microbial-induced corrosion from hydrogen sulphide gas. Our team can assist with compliance-related pump selection and system specification.

Sump and station design has a direct impact on pump reliability and service life. A well-configured sump with a modular layout helps optimise flow velocities and minimise turbulence, reducing wear on internal components.

Liquid levels and inflow approaches should be set up carefully to prevent air ingestion and swirl, both of which can cause uneven impeller loading, vibrations and premature bearing failures. Incorporating variable speed drives or intelligent control platforms allows dynamic performance adjustment during high-inflow events such as intense wet-weather periods.

Our technicians can review hydraulic conditions and site configuration as part of the supply and installation process.

Flygt operates as part of Xylem, widely regarded as one of the world's premier manufacturers of water and wastewater treatment technology. Xylem serves markets ranging from municipal water supply and raw water supply networks through to agriculture, irrigation, aquaculture, power generation and water reuse.

Across these markets, Flygt fluid handling equipment is relied upon by utilities, government infrastructure bodies and private operators to move and manage water reliably and efficiently. The depth of markets ranging across civil, environmental and industrial sectors means Flygt products are developed against the demands of varied, real-world conditions. Whether the application sits within municipal water distribution or agricultural water management, Flygt's position within Xylem makes it a globally recognised solution for a wide range of water challenges.

Flygt, as part of Xylem (one of the world's premier manufacturers of water technology) produces a wide range of submersible pumps suited to water and wastewater treatment applications across commercial, industrial and municipal sectors.

Their submersible pumps cover wastewater treatment, raw water supply, stormwater management and process water handling, with configurations ranging from compact units for sump and pit installations through to high-capacity pumps for large-scale infrastructure.

For sites with demanding duty conditions, specific submersible pumps are available in configurations matching solids content, flow rate and head requirements. Contact our team with your site details and we can identify the most suitable Flygt submersible pump for your application.

Yes, though this falls outside Sydney Central Pumps' supply scope. As part of Xylem — one of the world's premier manufacturers of water and wastewater treatment technology — Flygt's broader product range extends well beyond pumps. Xylem produces mechanical aeration equipment deployed across markets ranging from municipal sewage treatment plants and raw water supply systems through to industrial lagoon and effluent management facilities. Their range also includes mixers and supplementary fluid management products used in wastewater treatment processes requiring circulation or aeration. Mechanical aeration equipment of this type is particularly relevant for activated sludge systems and large-scale industrial water treatment operations.

Sydney Central Pumps concentrates on Flygt pump supply, installation and servicing. For mechanical aeration equipment and mixers, we recommend reaching out to Flygt or Xylem directly, who can connect you with the appropriate supplier or distributor for those product categories.

Yes. Flygt pumps are built to operate in contaminated industrial processes across a range of difficult environments, including chemical handling, process water contamination, industrial effluent and complex mixed wastewater streams. In contaminated industrial processes, pump material specifications, seal design and hydraulic configuration all play a role in determining the correct unit for the application.

As part of Xylem (one of the world's premier manufacturers of water and wastewater treatment technology) Flygt products are developed to perform in contaminated industrial processes across markets ranging from mining, manufacturing and chemical processing through to civil infrastructure and municipal operations. Raw water supply systems handling particulate-laden or chemically affected flows also fall within Flygt's capabilities.

Where contaminated industrial processes involve wastewater treatment streams with abrasive or corrosive media, specific material and coating options are available to match site conditions.